magnus Posted March 7, 2008 Share Posted March 7, 2008 Здравейте, Проблема ми е следния: Имам едно флопи от лаптоп със следния интерфейс: Slim FDD --------------- Pin # Signal Name 1 Fused +5.0V 2 Index 3 Fused +5.0V 4 Drive Select 0 5 Fused +5.0V 6 Diskette Change 7 NC 8 NC 9 Floppy Drive Enable 0 10 Motor Enable 0 11 NC 12 Direction 13 NC 14 Step 15 Ground 16 Write Data 17 Ground 18 Write Gate 19 Ground 20 Track 0 21 Ground 22 Write Protect 23 Ground 24 Read Data 25 Ground 26 Side 1 Select Искам да го ползвам на настолна машина с нормален 34 PIN-ов конектор и да си се познава като А устройство. Намерих и Pin-Out сигналите на стандартен конектор: FLOPPY Drive A Pin Out ---------------------------------------- Pin No. Signal Name Description 1 Ground -- 2 /REDWC Density Select 1=Low/0=High 3 Ground -- 4 N/C Reserved 5 Ground -- 6 N/C Reserved 7 Ground -- 8 /Index 0=Index 9 Ground -- 10 /MOTEA 0=Motor Enable Drive 0 11 Ground -- 12 /DRVSB Drive Select 1 13 Ground -- 14 /DRVSB Drive Select 0 15 Ground -- 16 /MOTEB 0=Motor Enable Drive 1 17 Ground -- 18 /DIR 0=Direction Select 19 Ground -- 20 /Step 0=Head Step 21 Ground -- 22 /WDATE Write Data 23 Ground -- 24 /WGATE Floppy Write Enable, 0=Write Gate 25 Ground -- 26 /TRK00 0=Track 00 27 Ground -- 28 /WPT 0=Write Protect 29 Ground -- 30 /RDATA Read Data 31 Ground -- 32 /SIDE1 0=Head Select 33 Ground -- 34 /DSKCHG 1=Disk Change/0=Ready Да си призная хич ме няма в разчитането на подобни работи. Та директно да си питам кое с кое номерче да свържа . Благодаря. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.