Jump to content
BulForum.com

Продавам USB 2.0 to SATA & IDE adapter


Recommended Posts

Изглежда като този на долната снимка (по-късно ще направя актуална). Пробвал съм го с 3.5" SATA дискове (500GB, 640GB) и един 3.5" IDE 320GB - чете ги безпроблемно, предполагам, че и с 2.5" няма да има проблем, а пише, че поддържа даже и CD-RW & DVD-RW.

 

Продава се за 5 лв.

 

Причина за продажбата - пред малко си поръчах цяла докинг станция за хард дискове.

 

Ето и по-подробно спецификациите му:
 

 

Features:

    Brand new and high quality.
    Quickly access SATA / IDE 3.5" (40-pin) / IDE 2.5" (44-pin) device by USB port.
    Support hard drive, CR-ROM, DVD-ROM, CD-RW, DVD-RW.
    Support 52x CD-ROM.
    Compliant with SATA 1.0a Electrical Specifications.
    Compliant with USB2.0 Electrical Specifications.
    Compliant with Bulk-Only Transport Specifications.
    Compliant with USB Mass Storage Class.
    Support ATA/ATAI LBA 48bit addressing mode.
    Support SATA spread-spectrum transmitter.
    Support SATAI Asynchronous Notification (Hot Plug) feature.
    Support 480Mbps High Speed and 12Mbps Full Speed USB operation.
    Support Windows 2000, me, XP, Vista , Win 7 and Mac OS.
    Plug & Play, Under Windows 2000 / ME / XP / Vista/ Win 7, no driver needed.
    Size:62cm x 0.4cm-24.41inch x 0.16inch.

Install Procedures:

    Please confirm your IDE hard drive has been set as Master.
    Connect the IDE/SATA port to the cable adpater.
    Connect power supply to the IDE/SATA hard dirve. (External power supply is required to power up the HDD).
    Connect the USB port to your motherboard USB interface, not the one in front panel.

Package Included:

    1 x USB 2.0 to IDE SATA 2.5 3.5 Hard Drive Converter Cable.

 

 

 

USB_to_ATA-SATA-IDE_1.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Guest
This topic is now closed to further replies.
×
×
  • Create New...